PKF series pulse back blow industrial vacuum cleaner

PKF—Pulse backflushing industrial vacuum cleaner

      PKE series products are characterized by simplicity and safety. Compared with other heavy industrial vacuum cleaners, the structure is lighter and more economical. It is suitable for continuous operation with large amount of dust or supporting industrial equipment. Widely used in metal processing, plastic sheet processing, batteries, casting, electronics, 3D printing and other industries.

♦ High-voltage power and continuous escort

           In terms of power system, it adopts international advanced precision casting turbine fan (air pump), wide pressure dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power can be selected from 1.5kw-4.0kw, and the power supply can be single-phase 230V 50 / 60Hz, three-phase 220-240 / 345-415V 50Hz and 220-275 / 380-480V 60Hz.

♦ Classic structure, stable operation

           In terms of the structure of the whole machine, the dust collection system and the power system are placed side by side. It is the most classic model of industrial vacuum cleaners. This structure runs smoothly and moves smoothly.

♦ Efficient filtering and refusing to penetrate the dust

           The filter system uses a cartridge filter. The cartridge filter adopts TORAY filter material imported from Japan. Specific working conditions can be customized.

           Cartridge filters can be coated to improve filtration accuracy and prevent dust penetration.

♦ Dust removal system, efficient and reliable

            Pulse backflush cleaning adopts automatic timing backflush cleaning mode. The operator only needs to press the dust cleaning button, and the built-in timer will automatically work and clean, and the inner surface of the injection filter cartridge is released instantly by high pressure airflow, so that Dust adhered to the outer surface of the filter cartridge.

♦ Built-in cyclone separator to reduce the load on the filter

            The built-in cyclone structure is the standard configuration of the machine. At the connection between the installation and the dust suction port, large particles of dust can directly settle down the dust collecting barrel after the cyclone, without the need to pass through the filter for interception and capture. Life.

♦ Stainless steel vacuum bucket, durable

            The vacuum buckets are all made of stainless steel, with smooth walls, convenient cleaning, strong corrosion resistance, and durability.

            The cover of the vacuum bucket is spin-formed by a CNC spinning machine.

♦ Negative pressure detection, dust removal reminder

            The negative pressure gauge is a standard configuration component of the whole machine. It is customized by Puhua for industrial vacuum cleaners. Green, blue, and red correspond to the internal negative pressure of the machine in each power segment. The pointer points to the red area to indicate that the filter needs to be cleaned or replaced.

♦ Industrial casters, standard configuration

            Installation of industrial casters is simple and convenient. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickling plate to increase the reinforcement. Each 2 inch caster can carry 50kg.

♦ Separation of upper and lower barrels, convenient cleaning

            The separation structure of the upper and lower buckets is the standard configuration of the machine. The biggest convenience for the user is the convenience of dust removal. When cleaning the dust, you only need to lift the pressure bar, and the dust bucket will naturally fall to the ground. The dust bucket dumps the dust, and then presses the lever after completion.