PGD Series Filter Dust Vibrating Industrial Vacuum Cleaner

PGD—Manual dust-type industrial vacuum cleaner with filter cartridge

        PGD series products are characterized by stability, high-precision filtration of the filter cartridge, and manual dust vibration. Compared with other heavy industrial vacuum cleaners, the filtration accuracy and economy are well balanced. Suitable for fine dust, powder and other occasions requiring high precision filtration. Widely used in workshop cleaning, plastic sheet processing, batteries, casting, electronics, 3D printing and other industries.

♦ High-voltage power and continuous escort

           In terms of power system, it adopts international advanced precision casting turbine fan (air pump), wide pressure dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power can be selected from 4.0kw-25.0kw, and the power supply can be selected from single-phase 230V 50 / 60Hz, three-phase 220-240 / 345-415V 50Hz and 220-275 / 380-480V 60Hz, etc. Special voltages can be customized.

♦ Manual rotation of filter cartridge for dust and dust removal, convenient and efficient

           Rotary vibration dust cleaning adopts manual dust vibration mode. Just rotate the rotation handle clockwise / counterclockwise for about 1 minute to remove large particles of dust adhered to the surface of the filter cartridge.

♦ Efficient filtering and refusing to penetrate the dust

           The filtration system uses a built-in cyclone separator + cartridge filter. The cyclone separator directly deposits large particles of dust or water droplets in the lower collection bucket.

           Japan Toray polyester fiber base material is treated with PTFE film, and the filtering accuracy of dust with an equivalent diameter of 0.3μm is more than 99%, which meets indoor emission standards, has small wind resistance and is easy to clean.

♦ Built-in cyclone separator to reduce the load on the filter

            The built-in cyclone structure is the standard configuration of the machine. At the connection between the installation and the dust suction port, large particles of dust can directly settle down the dust collecting barrel after the cyclone, without the need to pass through the filter for interception and capture. Life.

♦ Stainless steel vacuum bucket, durable

            The vacuum buckets are all made of stainless steel, with smooth walls, convenient cleaning, strong corrosion resistance, and durability.

            The cover of the vacuum bucket is spin-formed by a CNC spinning machine.

♦ Negative pressure detection, dust removal reminder

            The negative pressure gauge is a standard configuration component of the whole machine. It is customized by Puhua for industrial vacuum cleaners. Green, blue, and red correspond to the internal negative pressure of the machine in each power segment. The pointer points to the red area to indicate that the filter needs to be cleaned or replaced.

♦ Industrial casters, standard configuration

            Installation of industrial casters is simple and convenient. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickling plate to increase the reinforcement. Each 2 inch caster can carry 50kg.

♦ Separation of upper and lower barrels, convenient cleaning

            The separation structure of the upper and lower buckets is the standard configuration of the machine. The biggest convenience for the user is the convenience of dust removal. When cleaning the dust, you only need to lift the pressure bar, and the dust bucket will naturally fall to the ground. The dust bucket dumps the dust, and then presses the lever after completion.