DX series automatic discharge type

DX series - automatic discharge type industrial dust collector

DX series products are characterized by automatic discharge, large air volume, pulse back blowing ash removal, the use of integrated cabinet structure, beautiful appearance, especially for powder industry, chemical industry, metal processing industry, woodworking furniture industry and a large number of floating dust design, can achieve 24 hours of continuous work, cost-effective. Equipped with Siemens motor and toray polyester fiber filter barrel to ensure high filtration accuracy and efficiency.

♦Siemens motor, continuous escort

The three-phase 380V voltage of the power system adopts Siemens three-phase asynchronous motor, equipped with special customized aluminum alloy impeller, designed with perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, and 24-hour continuous operation.

♦ Filter cartridge filter, high filtering accuracy

The filter system chooses the filter drum filter, Japan toray polyester fiber base material. Standard configuration of polyester fiber oil-proof and waterproof material, for the equivalent diameter of more than 3 microns of dust filtration accuracy of more than 99%, can choose higher filtering precision filter barrel material.

♦Specially set ash cleaning door, no secondary pollution

Pneumatic pulse back blowing system is composed of cylinder, electromagnetic pulse valve, PLC controller and compressed air. One end of the pulse valve is connected to the compressed air storage cylinder and the other end is connected to the jet tube. An exhaust valve is provided on the bonnet and is controlled by a pulse controller.

When there is no signal sent out by the pulse controller, the pulse solenoid valve starts to work. Each time, the ash removal is completed around 0.1 ~ 0.3s, which means that the high-pressure air ejected at this moment has a good effect of ash removal. The air enters the filter cylinder at a high flow rate, which causes the filter cylinder to expand rapidly and causes a shock vibration. The dust attached to the filter cylinder is shaken off, and the dust adsorbed on the filter surface is shaken off to the dust collector under the action of airflow.

♦ Electronic control system, quality assurance

In terms of electrical system, the main electronic control components are manufactured by schneider of France, a famous international brand. The motor realizes independent control of the electric box, with built-in power supply main switch, thermal overload protection, phase missing and anti-equal phase sequence protection. The control panel is simple and elegant, which can easily realize remote control, linkage control and other functions.

♦ Automatic discharge motor, 24 hours continuous operation, not stop operation

The automatic unloading main engine is equipped with a star unloading valve, which is especially suitable for the occasions where the dust volume is especially large and the dust collector needs continuous operation, the work is stable and reliable, the unloading is even and the sealing is good.

♦ Industrial skid casters, top polyurethane material

Industrial mobile casters are standard accessories of this machine. The wheels are made of top-grade polyurethane (PU), and the support is made of 2.5mm pickling plate to increase the reinforcement. The 4-inch casters can bear 150kg.

♦ Custom vacuuming port, as you need